Temple Audio Design DI Mod Pro

Temple Audio Design DI Mod Pro for your Templeboard is a active stereo direct input box that retains the highest fidelity of your tone.

All Temple MODs install easily with just two screws. This module has a lift and a pad switch. Activate the lift switch if you are experiencing hum from a ground loop. If no ground loop noise is present, then leave disengaged to keep your signal grounded. Activating the -15db pad will reduce the volume of the input signal and prevent distortion from loud inputs.

The module can be used at the end or at the beginning of your signal. Option 1: at the end of your signal (wet out). Use your DI Mod Pro at the end of your signal chain so that your effects are sent to your wet/dry or stereo outputs. Send the two balanced XLR out to your mixer or interface and the THRU to your amplifiers. Option 2: at the beginning of your signal (dry out). Use your DI MOD as an stereo input at the beginning of your chain. This allows you to send a stereo dry signal to the interface / FOH as well as a thru to your pedalboard and amps / interface.