Temple Audio Design Stereo Amp Module

Temple Audio Design Stereo Amp Module is a stereo guitar amp module for your Temple pedalboard with a maximum of 2 x 50 Watt output.

The Amp Mod is a stereo guitar amp that mounts in the Modular Endpanel of your Templeboard. Each channel provides 50W of power for a total of 100W. When using one channel in mono mode, the Mod pushes approximately 75W.

The Amp Mod utilizes DSP to simulate the tone of a traditional tube amp (Fender Twin). You can disable amp modeling using the DIP switches if using an external amp modeler, bass guitar, or in any scenario where you don’t want the character of the amp simulation.

The module has a three band equalizer. Use the knobs in the EQ section to boost and cut the desired frequency range. The bass, mid, and treble knobs at “12 o’clock” (straight up) will yield the most neutral response.

The Mod has a volume knob, a headphone output and a Link output. This is a buffered stereo output that allows you to connect the Amp Mod to other Temple Audio output MODs.

This Mod needs current to power a loudspeaker. The Amp can function at different wattages depending on the power supply you are using. It is compatible with virtually any power supply. A standard 9V/300mA power supply will provide you with 3 Watt. A 24V/4,6A power supply will give you 100 Watt.