JHS Colour Box V2

 499

Delivery time around 13 days

JHS Colour Box V2 has all the same functionality of the popular V1 version with many new and improved additions like expanded EQ controls, a Hi/Lo switch for massive clean headroom, and the ability to pass phantom power to your condenser mics.

The Gain section in red has three controls: Master, Pre-Vol, and Step. The Master volume controls the overall volume of the unit. The Pre-Vol controls the amount of gain between the two internal gain stages. This acts as a “drive” or “gain” control, adding more grit, distortion, and even fuzz as you increase the gain. The Step control increases the gain of each preamp stage in five stages to a maximum of +39 dB.

The JHS Colour Box V2 has a new Hi/Lo switch to control the amount of clean headroom you have available. In the Lo mode, you will easily be able to get ultra clean sounds without breakup. Lo Mode is excellent for tone shaping when distortion is not needed. In the Hi mode, the Colour Box V2 will distort much more readily, giving you a broad spectrum of overdrive, distortion, and fuzz sounds.

In addition to the Hi / Lo gain switch, there is a -20 dB pad switch on the right side of the Colour Box V2. This function only works when in XLR input mode and can help tame the volume for high output microphones.

The EQ section in blue has three new Shift controls correlating to its standard Treble, Middle and Bass controls. The Shift knobs adjust the range of frequencies that the Treble, Middle, and Bass knobs control. The center frequencies for the Shift knobs are Treble 10kHz, Middle 1kHz, and Bass 120Hz, while the Treble, Middle, and Bass knobs boost or cut with +/- 17 dB of control.

The Hi-Pass section is enabled by the toggle switch below the Hi-Pass knob. Just flip it up to engage the Hi-Pass knob, which spans from 60Hz to 800Hz with a 6dB per octave slope. The Colour Box V2 has a combination XLR and 1/4″ input jack to use either an instrument or microphone. Select your input with the input selector switch on the right side of the pedal labeled INST/XLR.

JHS Colour Box V2 demo video

Available on backorder

SKU: 650415212224 Categories: ,
JHS Pedals

Description

  • Effect: Preamp, EQ, DI
  • Design: Analog
  • Mono/Stereo: Mono In, Mono Out, XLR In, XLR Out
  • Knobs: Master, Pre-Vol, Step, Hi Pass, Treble, Middle, Bass, Treble Shift, Mid Shift, Bass Shift
  • Switches: Hi-Pass, Hi/Lo, INST/XLR, pad
  • Bypass Mode: True Bypass
  • Power Supply: 9V DC, center negative
  • Power Consumption: 193 mA
  • Works on batteries: No
  • Format: Medium
  • Made in: USA

Additional information

Weight 0,48 kg
Dimensions 12 × 11 × 6 cm
Category

Stock

Brand

JHS

Sort

Guitar

Type

EQ, Preamp

Routing

Mono In / Mono Out

Brand

JHS Pedals

JHS Pedals

Reviews

There are no reviews yet.

Be the first to review “JHS Colour Box V2”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.