Cioks AC10

Cioks AC10 has 10 outputs and 6 isolated sections. The first 4 isolated outlets offering 600mA are perfect for pedals using 9 or 12V DC at lower currents op to 200mA.

The power supply has two powerful AC sections with 800mA each offer voltages 9, 12 and 16V AC. If you have one or two pedals in your setup, which requires an AC power source, AC10 is the right choice.

It powers all vacuum tube pedals from Electro-Harmonix, Kingsley, older Blackstar HT series, the Whammy or JamMan from DigiTech, Tube Rotosphere, Tubeman, Tube Factor or Replex from Hughes & Kettner or EBS Valve Drive just to mention a few.

If you only have one AC pedal, you can convert one of the AC sections into a powerful DC section offering 600mA with voltages 9, 12 and 15V DC.

What’s in the box?

• CIOKS AC10 power supply
• Mains power cord
• 17 Flex cables:
  Type 1 – black with 5,5/2,1mm centre negative DC plug x8
  Type 2 – red with 5,5/2,1mm centre positive DC plug x1
  Type 4 – green with 5,5/2,5mm centre positive DC plug x2
  Type 5 – black with 3,5mm tip positive Jack plug x1
  Type 6 – black with 9V battery clip x1
  Type 7 – blue with 2 pin DIN plug x1
  Split Flex type 1 – powers two pedals of a single outlet x1
  Stack Flex type 1 – white/black, adds voltages of two outlets x1
• Pedalboard mounting hardware: mounting bracket, screws, washers, stand-off and a hex key
• Manual
• Product sheet (drill guide)
• Flex guide

Cioks AC10 demo video

Not yet available.